New Boat 4 Sled

Quote:

---

Originally Posted by sleddog

I'm guessing someone is going to tell us they are building a 2 oz. CQR (plow) anchor complete with chain and windlass. "would you veer another inch of scope please?"

(front).

---

Busted!

Attachment 7980

Whaaat is up with that winch handle ??? I bet it doesn't grind winches, but would still probably open a beer. All my east coast 110 friends sail ice boats in the winter time. There is a huge class of the boats that they sail, called DNs. DN stands for Detroit News. There has to be a story there, but I don't know it.

Quote:

---

Originally Posted by MAGICdreamer

Busted! Attachment 7980

---

Macapuno with pomegranate arils for first to tell us the construction of Mini-MAGIC's CQR anchor:

1. lead 2. brass/bronze 3. Dynel 4. Clark foam 5. timber 6. iron 7. gold/silver amalgam 8. ceramic (clay) 9. aluminum 10. rubber 11. leather 12. painted coal 13. polyester resin 14. carbon fiber 15. Tufnol 16. It's fake, a photo-shopped pic of a CQR 22 pound anchor 17. cardboard and Elmers glue

Quote:

---

Originally Posted by sleddog

Macapuno with pomegranate arils for first to tell us the construction of Mini-MAGIC's CQR anchor:

1. lead 2. brass/bronze 3. Dynel 4. Clark foam 5. timber 6. iron 7. gold/silver amalgam 8. ceramic (clay) 9. aluminum 10. rubber 11. leather 12. painted coal 13. polyester resin 14. carbon fiber 15. Tufnol 16. It's fake, a photo-shopped pic of a CQR 22 pound anchor 17. cardboard and Elmers glue

---

Number 8 - ceramic clay.
Ants

Quote:

---

Originally Posted by AntsUiga

Number 8 - ceramic clay.
Ants

---

Sorry Ants, but you can guess again tomorrow.

Polyester resin

I think 1-lead.
Of course making the mold would be a bit of work!

Thanks For the picture Jackie!
Nice to see you on the water today.

Quote:

---

Originally Posted by sleddog

Macapuno with pomegranate arils for first to tell us the construction of Mini-MAGIC's CQR anchor:

1. lead 2. brass/bronze 3. Dynel 4. Clark foam 5. timber 6. iron 7. gold/silver amalgam 8. ceramic (clay) 9. aluminum 10. rubber 11. leather 12. painted coal 13. polyester resin 14. carbon fiber 15. Tufnol 16. It's fake, a photo-shopped pic of a CQR 22 pound anchor 17. cardboard and Elmers glue

---

#9. An aluminum lost wax (or lost foam) casting would be my first choice because aluminum has a relatively low melting temperature. Lead melts at an even lower temperature, but the result isn’t as hard and it’s kinds nasty to work with.

Quote:

---

Originally Posted by Dazzler

#9. An aluminum lost wax (or lost foam) casting would be my first choice because aluminum has a relatively low melting temperature. Lead melts at an even lower temperature, but the result isn’t as hard and it’s kinds nasty to work with.

---

Sorry but DAZZLER, Daydreamer, and MillyB are all incorrect. The anchor question remains unanswered... and Milly: you would lose the bet about the stubby winch handle not grinding winches. Point of fact: Dave Wahle had two engraved, double grip, chopped, bronze stubbies custom built by Chris Boome at Barient. Unfortunately they are both now at the bottom of the ocean, one half way to Hawaii and one near Natural Bridges.:(