Page 2 of 2 FirstFirst 12
Results 11 to 17 of 17

Thread: Raymarine X5 AP and Inst's

  1. #11
    Join Date
    Sep 2007
    Posts
    2,757

    Default

    Hey Steve K, I found the back cover for the ST4000+ head. A bonus is the workbench got cleared off. (No "before" photo is available.)
    Name:  Work bench Dec 15.JPG
Views: 210
Size:  351.5 KB

  2. #12
    Join Date
    Sep 2007
    Posts
    2,757

    Default

    Greg (Nightmare) has first dibs, then Steve H, then John S. I'll try to get this stuff organized after I get back from collecting my spiked eggnog from Sled tomorrow.

  3. #13
    Join Date
    Dec 2008
    Posts
    115

    Default

    I didn't mean for you take such drastic action as a complete workbench clean, but thanks. Another 6" of new snow here in Meyers. My compliments to the eggnog!

  4. #14
    Join Date
    Jan 2013
    Location
    Montara, CA
    Posts
    723

    Default

    Bob, did you gut an old kitchen to build that shop? It looks almost exactly like the shop in my Florida house, even down to the peg board and that opening piled full of stuff (mine has paint cans). That's really uncanny!

  5. #15
    Join Date
    Sep 2007
    Posts
    2,757

    Default

    (Pun intended?) Mine is actually still piled high with boat parts. I asked Erik to send me a photo of yours.
    Last edited by BobJ; 12-20-2015 at 09:16 AM.

  6. #16
    Join Date
    Dec 2008
    Posts
    115

    Default

    So it looks like it is going to work. On Friday I got the 4000+ installed and hooked up. Had to enlarge the hole but all the wiring hooked up. A few minor glitches but I think I'll have sucess with it. Shortly before dark Friday I had a grand time "swinging the compass" with 2 large turns out in the Port Potrero Channel. No commercial trafic to interfere. Got dark so I headed in and next time I'll fine tune it. Thanks BobJ.

  7. #17
    Join Date
    Sep 2007
    Posts
    2,757

    Default

    Quote Originally Posted by BobJ View Post
    Always glad to hook a sistah or brutha up...

    I have a slew of Raymarine ST60 and ST60+ stuff to unload, since I just upgraded my system to NMEA 2000. Anyone need anything?

    ST60 Multi's (1) - can display anything on your system and can also accept NMEA 0183 input to get GPS data (etc.) into the ST system.
    ST80 Wind Repeater - same size as the ST60 displays and never installed - great for the nav station.
    SPX-5 Autopilot system.
    Various ST cables and stuff.

    Everything works, is in great shape and includes sun covers. Most have manuals, some even have their original boxes.
    Wow, it's been almost a year . . .

    I still have a ST60 Multi and the ST80 Wind Repeater - and now the X5 is available if anyone needs an autopilot. I ran it yesterday before taking it out and it works fine. It's several years old but the drive is newer and runs smoothly. Included are the belowdecks computer and heading sensor, controller, drive and manuals = a complete set. Offer?
    .
    Name:  X5 Computer.JPG
Views: 168
Size:  664.7 KBName:  X5 6002 Head.JPG
Views: 96
Size:  470.1 KBName:  X5 Drive.JPG
Views: 84
Size:  435.9 KBName:  X5 Heading Sensor.JPG
Views: 90
Size:  449.5 KB
    Last edited by BobJ; 12-04-2016 at 07:24 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •