Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: What is this and what's wrong?

  1. #1
    Join Date
    Sep 2007
    Posts
    3,688

    Default What is this and what's wrong?


  2. #2
    Join Date
    Jan 2013
    Location
    Montara, CA
    Posts
    803

    Default

    Have no idea what its purpose is, but the pitting and the bolt backing out without its nut (or is that other bolt missing?) makes me hope it's not a critical piece of componentry, especially with that gap at the base where it looks like there might be some bearings.

    So, what is it?

  3. #3
    Join Date
    Oct 2013
    Location
    Austin, TX
    Posts
    119

    Default

    Reckon it is a Harken furler with a missing retainer bolt. Remove the other and see how well the furler works. Been there...

    Carry spare bolts and we run a piece of electrical tape around and over the bolts to ensure they don't back out again.
    Life is not a dress rehearsal.

    Bermuda 1-2 on a Schumacher 28

  4. #4
    Join Date
    Sep 2007
    Posts
    3,688

    Default

    Yep, Justin got it. Welcome back Cotter...I mean Carliane. (Great video clip - post it here!)

    With SHF coming up, I decided to check the torque tube screws in the furler. They had been tight with a couple layers of black tape wrapped around the tube, and I noticed the tape was getting loose. How one screw backed out and escaped under the tape is a mystery and a second was clearly on its way. No screws, no rollie-rollie. The scaly stuff is just glue from the tape, and more screws are on order.

    Lost screws from Harken furlers is the stuff of stories around here - so check those screws!

  5. #5
    Join Date
    Jan 2010
    Posts
    3,485

    Default

    Tape around the screws: why didn't I think of that? Duh

  6. #6
    Join Date
    Sep 2008
    Location
    SF Bay Area
    Posts
    380

    Default

    Silicone "Rescue Tape" (as sold at the boat shows and at Whale Point Hardware) works even better. Self amalgimating, tougher than electrical tape, and no sticky residue.

  7. #7
    Join Date
    Jan 2013
    Location
    Montara, CA
    Posts
    803

    Default

    Quote Originally Posted by Dazzler View Post
    Silicone "Rescue Tape" (as sold at the boat shows and at Whale Point Hardware) works even better. Self amalgimating, tougher than electrical tape, and no sticky residue.
    Personally, I'm a fan of Gorilla tape for stick-to-it-ness though I love Rescue Tape for areas where you want a cleaner appearance because, as we all know, it's really all about how pretty the boat looks And Loctite for those bolts, just to be safe!

    I'm planning to put together a highlight reel of Tubbataha Reef. AMAZING place. Hope to post that soon!

  8. #8
    Join Date
    Sep 2007
    Posts
    3,688

    Default

    I had to buy a pack of 100 at McMaster-Carr (I love that place!)

    If anyone needs Harken furler screws, just let me know. (Free)

  9. #9
    Join Date
    Aug 2009
    Posts
    44

    Default

    So I just got a used furler and am trying to check for the loose screws before installing it, but I can't quite figure out the picture. Is this a mkIV furler?

  10. #10
    Join Date
    Sep 2007
    Posts
    3,688

    Default

    I think it's a Mk III drum - I replaced it about 10 years ago and can't remember. The photo of your furler on FB looked like a newer design so maybe there are no screws into the torque tube - it was actually a weakness in the earlier design. That said, I have 100 screws and only need one so if you do need them, don't buy any.

    Do you want to hoist that #4 to look at? If so I'll leave it in your cockpit. (I'm not pushing to sell it - it's just to help you out.)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •