Page 2 of 2 FirstFirst 12
Results 11 to 12 of 12

Thread: Seminars

  1. #11
    Join Date
    Jan 2014
    Location
    Arnold, CA
    Posts
    400

    Default

    Since i've been sidelined here at home for the last few weeks and haven't been able to do any races or get to the seminar, ( I know, waaaa! ) I have a list of questions regarding the Long Pac Safety Equipment Requirements.


    2.7.1 "mechanical propulsion system that is quickly available" My boat has an outboard motor that i will remove to instal an e-rudder. Does having the motor aboard with a provision to be able to instal it suffice?
    Can I leave it on the dock?

    3.3.2 " second set of navigation lights that can be connected to a different power source than the primary lights." I have a masthead tri-color and deck lights on dedicated circuits, but both connected to the same battery bank.
    Do I need another battery that is isolated from the system?

    3.9 "All boats shall have an AIS transponder" Does this me I have to have the capacity to SEND AIS? I have the ability to receive AIS.

    3.13 " A boat shall have a method of receiving weather information in addition to VHF" i can get basic forecast info on my Delorme. Will this qualify?

    3.17 "A boat shall have a knot meter and/or distance measuring instrument." I have two separate GPS units that give me speed over ground and position. I have a taffrail log, can I leave it on the dock too?

    3.29.1 "A boat shall have an emergency tiller, capable of being fitted to the rudder stock." I have backup tiller that attaches to the rudder head. Do I need another head to attach to the rudder shaft?

    3.33.2 Trysail or "Alternatively, a mainsail with a reefing system to reduce the luff length by at least 40%, but which does not obscure the appearance of the yachts sail numbers will satisfy the trysail requirement."
    I don't have measurements for my reef points, but after looking at photos, it looks like I need to add a third reef.

    Name:  Nightmare under sail IMG_8130_Dxo.jpg
Views: 57
Size:  189.6 KB

    I think that is about all for now. I need to measure the two small jibs I have to make sure they fit the dimensions for 3.33.3 "heavy weather jib" and 3.33.4 "storm jib"

    Just a little over a month to go and still lots to do! Yikes!!

  2. #12
    Join Date
    Sep 2007
    Posts
    2,722

    Default

    Most of those requirements were removed in the updated list:

    http://sfbaysss.org/archive-race-res...20%20Clean.pdf

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •