Results 1 to 3 of 3

Thread: SSS Offshore Lifeline Requirements???

  1. #1
    Join Date
    Aug 2009
    Location
    Sausalito CA
    Posts
    89

    Default SSS Offshore Lifeline Requirements???

    Going over Safety Equipment Requirements for SSS specific Offshore racing this year....What is the SSS stance on uncoated stainless vs. HMPE line with proper chafe sleeves? Anyone know why US sailing reversed their allowance of HMPE? I guess I understand the reversal relating to a fully crewed situation where the lifelines are loaded and unloaded repeatedly....If the chafe sleeves are not done correctly there could be an issue there....But from a shorthanded perspective? Whats our stance? Thanks!

  2. #2
    Join Date
    Nov 2007
    Posts
    337

    Default

    We go by NCORC which is:

    Lifelines may be either uncoated stainless steel wire or high molecular weight polyethylene (HMPE) line with spliced terminations or terminals specifically intended for the purpose. A multipart-lashing segment not to exceed 4" per end termination for the purpose of attaching lifelines to pulpits is allowed. Lifelines shall be taut (see appendix for requirements). When HMPE is used, the load-bearing portion (core) shall meet or exceed minimum diameter requirements. HMPE lifelines should be carefully inspected at least twice per year. *NCORC change, US Sailing does not allow HMPE.

    My experience with synthetic lifelines has been great. I have no chafe sleeves (although I've had that done on a few boats). Lashing ends replaced but the lifelines themselves are like 7 years old. No sign of wear at the pass through. Lots of crewed and shorthanded sailing on them. Next time I'd size them up one just for comfort.
    Last edited by solosailor; 02-25-2019 at 10:50 AM.

  3. #3
    Join Date
    Aug 2009
    Location
    Sausalito CA
    Posts
    89

    Default

    Perfect! Thanks for the clarification!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •