I fixed the electrical problem on the boat. YAAY, me! it was two butt-joint fittings in the main power and ground wires going from the main switch to the electrical panel. Those wires are in the bilge. The joints weren't sealed and they corroded. So I cut them out, stripped the wire back to "good stuff" and put in new joiners....and sealed them both with silicon tape. I need to make a couple of "hooks" to get them out of the bilge, though, by suspending them up a few inches.
I still need to install the new panel for SHTP but now I have lights and an autopilot for the Corinthian race.
1968 Selmer Series 9 B-flat and A clarinets
1962 Buesher "Aristocrat" tenor saxophone
Piper One Design 24, Hull #35; "Alpha"