35 minutes with a hand saw, rasp attachment on my drill, and the rotary tool, and the inserts fit as planned.
I picked up a nice straight 3/4 inch hardwood dowel and some JB Weld at the hardware store today. I'll "weld" the inserts into the gudgeon wood tonight, and use the dowel....which fits inside the inserts, to keep them lined up just right.. JB Weld is an epoxy product which is preposterously expensive, per volume. It's an epoxy paste mix reinforced with steel. They claim a 5,000 lb fully set strength, and it bonds to both wood and metal. Considering as I used a patch 2 inches x 2 inches to affix a steel loop/patch to a 300 pound stone for the Highland Games a few years ago, and a whole lot of brutishly strong guys have carried that stone hither thither and yon without the JB Weld failing, I think it's pretty strong.
One layer of fiberglass tape will go over the s.s. inserts, and then a 4, 5, 6 of layers of unidirectional carbon straps will go on top of that. A couple of the straps will go around the whole cassette. Since I'm out of epoxy and don't really have time to get to TAP plastics before Saturday, This is what y'all will see on Saturday at the seminar.
Last edited by AlanH; 01-09-2020 at 12:12 PM.
1968 Selmer Series 9 B-flat and A clarinets
1962 Buesher "Aristocrat" tenor saxophone
Piper One Design 24, Hull #35; "Alpha"