Originally Posted by
AntsUiga
Two to three decades ago, there were generic direction that were applicable to three strand and ropes with cores. There were splicing tools that were seemingly universal.
With the new high modulus materials, each maker has a video that is slightly different (for seemingly identical materials). It annoys me to no end.
Brion Toss has an excellent reputation in Port Townsend where his shop is located. In addition to the Rigger's Apprentice book, Brion also sells spicing tools for pulling braids and cores. In addition, he advertises a generic splicing guide that covers various new materials. I called him up and asked what would work for my needs on the Moore 24. So, an order was placed for overall book, splicing tool, and generic guide to modern ropes. The order arrived with everything except the generic guide for modern ropes. A follow up call revealed the guide was out of print, but a new one would not be available until an update was written. Continued annoyance on new materials.
So, if anyone has experience with splicing new materials, I would certainly appreciate any tips.
As far as an eye splice in a normal double braid, keep an eye on instructions for tapering the core or cover when reinserted. There is a length that is needed for friction so the splice holds, but the rest can be tapered so it goes in better.
There are numerous splicing tools and some work better than others. The Toss splicing tool is a high end version that slips full length where splice must go, has a tapered tip to make pulling easier as well as a loop to hold the pulled material better.
It is safe to say the paid riggers use better tools so the job gets done faster.
Ants